How to embroidery Plaid

On this page, we explain how to embroider "Plaid" and points with photos and GIF videos.
It's very easy because it's an embroidery that goes through like weaving threads.
It is also recommended for patterning high heels and bags, and for embroidering alphabets.

Plaid embroidery

Table of contents

【１】Weft Beginning stitch
【２】Weft embroidery method
【３】Weft end stitch
【４】Warp Beginning stitch
【５】Warp embroidery method
【６】How to embroider with accent thread

【１】Weft Beginning stitch

Make Beginning stitch near the start position

Make Beginning stitch so that it will be hidden by the stitches that will be embroidered later.
The stitch at the beginning of stitching is completed by stitching two small straight stitches as shown in the video.

The point is to make the stitch at the beginning of the stitch as small as possible on the draft line.
Since the number of stitches at the beginning and end of stitching will be increased later, it will be easier to embroider by making it as small and narrow as possible.

【２】Weft embroidery method

Embroider with the image of satin stitch with gapsで刺繍

Embroider the weft with a little space between the threads.

The warp thread will be threaded later, so pull the weft thread with a slightly looser force.
The tension is the same throughout, so be careful not to pull too much on one part or loose it on another part.

【３】Weft end stitch

Make it so that it is hidden under the thread

Shift the thread with your finger to create the stitch at the end of the stitch.
Just like the stitch at the beginning of the stitch, two small straight stitches will be the stitch at the end of the stitch.

【４】Warp Beginning stitch

Make the first stitch under the weft that you embroidered earlier.

【５】Warp embroidery method

The warp threads are passed alternately on the upper and lower sides at intervals of 5 weft threads.
Don't pull the thread too hard, make sure the tension is the same throughout.

Three warp threads are passed through one set at the same intervals.
The interval between each set is about the same as the width of one set of three.

【６】How to embroider with accent thread

Embroider with line embroidery stitches between the warp threads.
(outline stitch, stem stitch, back stitch, chain stitch, etc.)

You can fix the weft by embroidering the accent thread.
The weft thread is embroidered while adjusting the force so that it does not move as much as possible.

When embroidering with outline stitches and stem stitches, align the direction of the threads to be embroidered in the same direction.
Be careful not to have outline stitches and stem stitches row by row.

When handling gold embroidery thread like this time, it is easy to separate when pulling the thread.It is recommended that you pull the thread while hooking it on the needle to make it easier to embroider.

Watch a video on how to embroidery

"Plaid embroidery method" is explained from 3 minutes 19 seconds.
Subtitles are included, so please turn them on and watch.

How to embroidery Basket pattern

この投稿をInstagramで見る

Sfil | オーガンジー刺繍(@sfil_embroidery)がシェアした投稿